Research Article

Structural, electrical, thermal, mechanical properties and micro-hardness in Sn-based Sn-Pb-Al ternary alloys

Volume: 38 Number: 4 December 8, 2017
TR EN

Structural, electrical, thermal, mechanical properties and micro-hardness in Sn-based Sn-Pb-Al ternary alloys

Abstract

The structural, electrical, thermal, mechanical properties and micro-hardness of five different samples of Sn-Pb-Al ternary alloys (Sn-[x] wt. % Pb-10 wt. % Al) (x=40, 30, 20 and 10) with constant Al concentrations, and the eutectic Sn-Pb-Al (Sn61.82Pb38.10Al0.08) ternary alloy were investigated. The electrical conductivity of the samples, depending on temperature, was measured using the four-point probe technique (4PPT). The temperature dependence of the thermal conductivities of the samples was shown using the Wiedemann-Franz (W-F) law with the data obtained from electrical measurements. Scanning Electron Microscope (SEM), X-ray diffraction (XRD), and Energy Dispersive X-ray Analysis (EDX) measurements were carried out to reveal the surface morphology, crystal structure, cell parameters, grain sizes, and chemical compositions. Tensile tests were carried out to determine the ultimate tensile strengths depending on the particle size of each component in the alloys. The results of the micro-hardness tests were found using a Vickers test machine for each component of the alloys. 

Keywords

References

  1. [1]. Guang-ming X., Bao-mian L., Jian-zhong C., Effect of Heat Treatment on Microstructure and Property of Al-Sn-Pb Bearing Material, J. Iron Steel Res. Int., 2006, 13, 2, 73-76.
  2. [2]. Noskova N.I., Korshunov L.G., Korznikov A.V., Microstructure and tribological properties of Al - Sn, Al - Sn - Pb, AND Sn - Sb - Cu alloys subjected to severe plastic deformation, Met. Sci. Heat Treat., 2008, 50, 11-12, 593-599.
  3. [3]. Noskova N.I., Vil’danova N.F., Filippov YuI., Churbaev R.V., Pereturina I.A., Korshunov L.G., Korznikov A.V., Preparation, deformation, and failure of functional Al-Sn and Al-Sn-Pb nanocrystalline alloys, The Physics of Metals and Metallography, 2006, 102, 646-651.
  4. [4]. Shim J.H., Lee H.N., Ha H.P., Cho Y.W., Yoon E.P., Liquid miscibility gap in the Al-Pb-Sn system, J. Alloys Compd., 2001, 327, 270-274.
  5. [5]. Kittel C. Introduction to Solid State Physics, 8th Ed. John Wiley and Sons, New York, 2005, pp. 156.
  6. [6]. Ari M., Saatçi B., Gündüz M., Meydaneri F., Bozoklu M., Microstructure and Thermo-Electrical Transport Properties Of Cd-Sn Alloys, Mater. Charact., 2008, 59, 624-630.
  7. [7]. Saatçi B., Ari M., Gündüz M., Türktekin S., Meydaneri F., Durmuş S., Özdemir M., Structural and Transport Properties Of Sn-Mg Alloys, Continuum Mech. Thermodyn., 2013, 25,739-748.
  8. [8]. Ocak Y., Aksöz S., Maraşlı N., Keşlioğlu K., Thermal and electrical conductivity of Sn–Ag-In alloys, J. Non-Crystalline Solids., 2010, 356, 1795-1801.

Details

Primary Language

English

Subjects

-

Journal Section

Research Article

Authors

Tuncay Karaaslan

Buket Saatçi

Publication Date

December 8, 2017

Submission Date

October 2, 2017

Acceptance Date

October 24, 2017

Published in Issue

Year 2017 Volume: 38 Number: 4

APA
Alper Billur, C., Arı, M., Karaaslan, T., & Saatçi, B. (2017). Structural, electrical, thermal, mechanical properties and micro-hardness in Sn-based Sn-Pb-Al ternary alloys. Cumhuriyet Science Journal, 38(4), 39-51. https://doi.org/10.17776/csj.341093

As of 2026, Cumhuriyet Science Journal will be published in six issues per year, released in February, April, June, August, October, and December