Yıl 2021,
Cilt: 42 Sayı: 3, 735 - 742, 24.09.2021
Özlem Yılmaz
Sevda İldan Özmen
,
Hülya Metin Gübür
Proje Numarası
2017-2-TP3-2593 and 2017-2-TP2-2573
Kaynakça
- [1] Ojo A. A., Influence of electroplating temperature on the characteristic properties of zinc sulphide, Mater. Res. Express, 6 (2019).
- [2] Igweoko A. E., Augustine C., Idenyi N. E., Okorie B. A., Anyaegbunam F. N. C., Influence of processing conditions on the optical properties of chemically deposited zinc sulphide (ZnS) thin film, Mater. Res. Express, 5 (2018).
- [3] Nabiyouni G., Sahraei R., Toghiany M., Ara M. H. M., Hedayati K., Preparation and characterization of nanostructured ZnS thin films grown on glass and N-type Si substrates using a new chemical bath deposition technique, Rev. Adv. Mater. Sci., 27 (2011) 52–57.
- [4] Metin H., Esen R., Changes on the Structural and Optical Properties of ZnS Films by Chemical Bath Deposition Technique on Annealing in Air Atmosphere, Cumhur. Univ. Fac. Arts Sci. - J. Sci., 28 (3) (2003) 82–91.
- [5] Xie Y. et al., Improving performance in CdTe/CdSe nanocrystals solar cells by using bulk nano-heterojunctions, J. Mater. Chem. C, 4 (2016) 6483–6491.
- [6] Zhou L., Tang N., Wu S., Hu X., Xue Y., Influence of deposition time on ZnS thin films performance with chemical bath deposition, Phys. Procedia, 22 (2011) 354–359.
- [7] Ortega-Cardenas J. A., Albor-Aguilera M. L., Hernabdez-Vasquez C., Impact of different thermal treatments on ZnS physical properties and their performance in CdTe solar cells, Mater. Res. Express, 6 (8) (2019).
- [8] Haddad H., Chelouche A., Talantikite D., Merzouk H., Boudjouan F., Djouadi D., Effects of deposition time in chemically deposited ZnS films in acidic solution, Thin Solid Films, 589 (2015) 451–456.
- [9] Arenas O. L., Nair M. T. S., Nair P. K., Chemical bath deposition of ZnS thin films and modification by air annealing, Semicond. Sci. Technol., 12 (1997) 1323–1330.
- [10] Göde F., Güneri E., Kariper A., Ulutaş C., Kirmizigül F., Gümüş C., Influence of annealing temperature on the structural, optical and electrical properties of amorphous Zinc Sulfide thin films, 17th International Conference on Microscopy of Semiconducting Materials 2011-Journal of Physics: Conference Series, 2011.
- [11] Nwofe P. A., Robert B. J., Agbo P. E., Influence of processing parameters on the structural and optical properties of chemically deposited Zinc Sulphide thin films, Mater. Res. Express, 5 (10) (2018).
- [12] Talantikite-Touati D., Merzouk H., Haddad H., Tounsi A., Effect of dopant concentration on structural and optical properties Mn doped ZnS films prepared by CBD method, Optik, 136 (2017) 362–367.
- [13] Jobzari H. G., Iranmanesh P., Sabet M., Saeednia S., Effect of synthesis method and chemical reagents on the structural parameters, particle size, and optical and photoluminescence properties of ZnS nanostructures, Luminescence, (2019) 1-10.
- [14] Nikzad M., Khanlary M. R., Rafiee S., Structural , optical and morphological properties of Cu ‑ doped ZnS thin films synthesized by sol – gel method, Appl. Phys. A Mater. Sci. Process., 125 (507) (2019).
- [15] Pankove J. I., Optical Processes in Semiconductors. New York: Dover Publications, (1971).
- [16] Metin H., Erat S., Arı M., Bozoklu M., Characterization of CdSe films prepared by chemical bath deposition method, Optoelectron. Adv. Mater. Rapid Commun., 2 (2) (2008) 92–98.
- [17] Yang K., Li B., Zeng G., Effects of temperature on properties of ZnS thin films deposited by pulsed laser deposition, Superlattices Microstruct., 130 (2019) 409–415.
- [18] Liang G., Fan P., Chen C., Luo J., Zhao J., Zhang D., Improved microstructure and properties of CBD-ZnS thin films, J. Mater. Sci. Mater. Electron., 26 (2015) 2230–2235.
- [19] Wei A., Liu J., Zhuang M., Zhao Y., Preparation and characterization of ZnS thin films prepared by chemical bath deposition, Mater. Sci. Semicond. Process., 16, (6) (2013) 1478–1484.
- [20] Bakiyaraj G., Gopalakrishnan N., Dhanasekaran R., Influences of thermal annealing on the stuctural, optical and electrical properties of nanostructured cadmium sulphide thin films, Chalcogenide Lett., 8 (7), (2011) 419–426.
- [21] Erdogan N. H., Kara K., Ozdamar H., Esen R., Kavak H., Effect of the oxidation temperature on microstructure and conductivity of Zn x N y thin films and their conversion into p-type ZnO:N films, Appl. Surf. Sci., 271 (2013) 70–76.
- [22] Khallaf H., Oladeji I. O., Chow L., Optimization of chemical bath deposited CdS thin films using nitrilotriacetic acid as a complexing agent, Thin Solid Films, 516 (2008) 5967–5973.
- [23] Liu F. et al., Characterization of chemical bath deposited CdS thin films at different deposition temperature, J. Alloys Compd., 493 (2010) 305–308.
- [24] Kose S., Atay F., Bilgin V., Akyuz I., Ketenci E., Optical characterization and determination of carrier density of ultrasonically sprayed CdS:Cu films, Appl. Surf. Sci., 256 (2010) 4299–4303.
Effects of annealing on ZnS films produced by CBD method
Yıl 2021,
Cilt: 42 Sayı: 3, 735 - 742, 24.09.2021
Özlem Yılmaz
Sevda İldan Özmen
,
Hülya Metin Gübür
Öz
The Zinc Sulfide (ZnS) thin films were produced at 60 ºC on glass slides with the chemical bath deposition (CBD) method. The ZnS films were annealed for 1 hour at different temperatures in the air atmosphere. UV-visible spectrophotometer, X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), four-point probe technique and Hall-effect measurement techniques were used to examine the thermal annealing's effect on the films' optical, structural, and electrical properties. It was observed that with increased annealing temperature, the film thickness increased and thus the energy band gap decreased. It was seen that the particle size of the ZnS films grew depending on the annealing temperature, and the crystal structure turned into an amorphous structure. Finally, it was determined that with the impact of annealing the carrier type did not change, and the conductivity of the ZnS thin films increased.
Destekleyen Kurum
Scientific Research Project Fund of Mersin University
Proje Numarası
2017-2-TP3-2593 and 2017-2-TP2-2573
Teşekkür
The authors would like to thank the Mersin University Advanced Technology Education Research and Application Center (MEİTAM) for its technical support and Prof. Dr. Ramazan Esen for the Hall measurements.
Kaynakça
- [1] Ojo A. A., Influence of electroplating temperature on the characteristic properties of zinc sulphide, Mater. Res. Express, 6 (2019).
- [2] Igweoko A. E., Augustine C., Idenyi N. E., Okorie B. A., Anyaegbunam F. N. C., Influence of processing conditions on the optical properties of chemically deposited zinc sulphide (ZnS) thin film, Mater. Res. Express, 5 (2018).
- [3] Nabiyouni G., Sahraei R., Toghiany M., Ara M. H. M., Hedayati K., Preparation and characterization of nanostructured ZnS thin films grown on glass and N-type Si substrates using a new chemical bath deposition technique, Rev. Adv. Mater. Sci., 27 (2011) 52–57.
- [4] Metin H., Esen R., Changes on the Structural and Optical Properties of ZnS Films by Chemical Bath Deposition Technique on Annealing in Air Atmosphere, Cumhur. Univ. Fac. Arts Sci. - J. Sci., 28 (3) (2003) 82–91.
- [5] Xie Y. et al., Improving performance in CdTe/CdSe nanocrystals solar cells by using bulk nano-heterojunctions, J. Mater. Chem. C, 4 (2016) 6483–6491.
- [6] Zhou L., Tang N., Wu S., Hu X., Xue Y., Influence of deposition time on ZnS thin films performance with chemical bath deposition, Phys. Procedia, 22 (2011) 354–359.
- [7] Ortega-Cardenas J. A., Albor-Aguilera M. L., Hernabdez-Vasquez C., Impact of different thermal treatments on ZnS physical properties and their performance in CdTe solar cells, Mater. Res. Express, 6 (8) (2019).
- [8] Haddad H., Chelouche A., Talantikite D., Merzouk H., Boudjouan F., Djouadi D., Effects of deposition time in chemically deposited ZnS films in acidic solution, Thin Solid Films, 589 (2015) 451–456.
- [9] Arenas O. L., Nair M. T. S., Nair P. K., Chemical bath deposition of ZnS thin films and modification by air annealing, Semicond. Sci. Technol., 12 (1997) 1323–1330.
- [10] Göde F., Güneri E., Kariper A., Ulutaş C., Kirmizigül F., Gümüş C., Influence of annealing temperature on the structural, optical and electrical properties of amorphous Zinc Sulfide thin films, 17th International Conference on Microscopy of Semiconducting Materials 2011-Journal of Physics: Conference Series, 2011.
- [11] Nwofe P. A., Robert B. J., Agbo P. E., Influence of processing parameters on the structural and optical properties of chemically deposited Zinc Sulphide thin films, Mater. Res. Express, 5 (10) (2018).
- [12] Talantikite-Touati D., Merzouk H., Haddad H., Tounsi A., Effect of dopant concentration on structural and optical properties Mn doped ZnS films prepared by CBD method, Optik, 136 (2017) 362–367.
- [13] Jobzari H. G., Iranmanesh P., Sabet M., Saeednia S., Effect of synthesis method and chemical reagents on the structural parameters, particle size, and optical and photoluminescence properties of ZnS nanostructures, Luminescence, (2019) 1-10.
- [14] Nikzad M., Khanlary M. R., Rafiee S., Structural , optical and morphological properties of Cu ‑ doped ZnS thin films synthesized by sol – gel method, Appl. Phys. A Mater. Sci. Process., 125 (507) (2019).
- [15] Pankove J. I., Optical Processes in Semiconductors. New York: Dover Publications, (1971).
- [16] Metin H., Erat S., Arı M., Bozoklu M., Characterization of CdSe films prepared by chemical bath deposition method, Optoelectron. Adv. Mater. Rapid Commun., 2 (2) (2008) 92–98.
- [17] Yang K., Li B., Zeng G., Effects of temperature on properties of ZnS thin films deposited by pulsed laser deposition, Superlattices Microstruct., 130 (2019) 409–415.
- [18] Liang G., Fan P., Chen C., Luo J., Zhao J., Zhang D., Improved microstructure and properties of CBD-ZnS thin films, J. Mater. Sci. Mater. Electron., 26 (2015) 2230–2235.
- [19] Wei A., Liu J., Zhuang M., Zhao Y., Preparation and characterization of ZnS thin films prepared by chemical bath deposition, Mater. Sci. Semicond. Process., 16, (6) (2013) 1478–1484.
- [20] Bakiyaraj G., Gopalakrishnan N., Dhanasekaran R., Influences of thermal annealing on the stuctural, optical and electrical properties of nanostructured cadmium sulphide thin films, Chalcogenide Lett., 8 (7), (2011) 419–426.
- [21] Erdogan N. H., Kara K., Ozdamar H., Esen R., Kavak H., Effect of the oxidation temperature on microstructure and conductivity of Zn x N y thin films and their conversion into p-type ZnO:N films, Appl. Surf. Sci., 271 (2013) 70–76.
- [22] Khallaf H., Oladeji I. O., Chow L., Optimization of chemical bath deposited CdS thin films using nitrilotriacetic acid as a complexing agent, Thin Solid Films, 516 (2008) 5967–5973.
- [23] Liu F. et al., Characterization of chemical bath deposited CdS thin films at different deposition temperature, J. Alloys Compd., 493 (2010) 305–308.
- [24] Kose S., Atay F., Bilgin V., Akyuz I., Ketenci E., Optical characterization and determination of carrier density of ultrasonically sprayed CdS:Cu films, Appl. Surf. Sci., 256 (2010) 4299–4303.