Araştırma Makalesi
BibTex RIS Kaynak Göster

Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM)

Yıl 2017, Cilt: 1 Sayı: 1, 22 - 31, 27.12.2017

Öz

The source of geothermal energy to be used for
district heating systems is, in most cases, located some distance from the
heating market, although geothermal water may also be found within the market
area. A transmission pipeline is therefore needed to transport the geothermal
fluid from the geothermal field to the end users. Geothermal fluids can be
transported over fairly long distances in thermally insulated pipelines.
Transmission pipelines of even 60 km length have been built with acceptable
heat loss values, though shorter transmission distances are much more common
and clearly more desirable. At flowing conditions, the temperature drop in
insulated pipelines is in the range of 0.1 to 1.0°C/km, while in uninsulated
lines it is 2 to 5°C/km (in the range of 5 to 15 l/s flow
for
15-cm diameter pipe
).

 

In addition to a group of parameters, which are almost
constant, such as the length, diameter, thickness, thermal insulation
properties and material type of the pipeline, whether above ground or buried
and so on, temperature drop rate in transmission pipelines is strongly affected
by flow rates. At low flow rates, the temperature drop is higher than that of
greater flow rates. The temperature drop depending on the flow rate becomes
more apparent for relatively long pipelines.

 









In this study, the temperature drops in the
transmission pipeline of the Bigadiç geothermal district heating system (GDHS),
a buried 18 km long pipeline, is investigated for varying flow rates. Response
Surface Methodology (RSM) is then used for modelling and estimating the flow
rate depending on the temperature drop in the pipeline. The results show that
the flow rates given by the model (with R2,
coefficient of determination, of 96.67%) are in a good agreement with those
measured by the flowmeter.

Kaynakça

  • J.W. Lund, D.H. Freeston and T.L. Boyd, 2005. Direct application of geothermal energy. Geothermics. 34, 691-727.
  • J.W. Lund and T. Boyd, 2015. Direct Utilization of Geothermal Energy 2015 Worldwide Review. Proceedings World Geothermal Congress 2015. Melbourne-Australia.
  • M. Parlaktuna, O. Mertoglu, S. Simsek, H. Paksoy and N. Basarir, 2013. Geothermal Country Update Report of Turkey (2010-2013). European Geothermal Congress. Pisa- Italy.
  • A. Ragnarsson and I. Hrolfsson, 1998. Akranes and Borgarfjordur District Heating System. Geo-Heat Center Quarterly Bulletin, 19 (4).
  • M. H. Dickson, and M. Fanelli (Eds.), Geothermal Energy Utilization and Technology, UNESCO, France, 2003. G. P. Ryan, 1981. Equipment Used in Direct Heat Projects. Geothermal Resources Council Transactions.5, Davis, CA, pp. 483-485.
  • J.W. Lund, 2006. Direct Heat Utilization of Geothermal Resources Worldwide 2005. ASEG Extended Abstracts 2006: 18th Geophysical Conference.1-15.
  • T. Akyol, 2016. Energy and Exergy Analysis of Bigadiç-Balıkesir Geothermal District Heating System, PhD Thesis, Department of Mechanical Engineering, Graduate School of Natural and Applied Sciences, Balıkesir University, Turkey.
  • A.D. Karaoglan, N. Celik, 2016. A New Painting Process for Vessel Radiators of Transformer: Wet-on-Wet (WOW). Journal of Applied Statistics. 43 (2), 370-386.
Yıl 2017, Cilt: 1 Sayı: 1, 22 - 31, 27.12.2017

Öz

Kaynakça

  • J.W. Lund, D.H. Freeston and T.L. Boyd, 2005. Direct application of geothermal energy. Geothermics. 34, 691-727.
  • J.W. Lund and T. Boyd, 2015. Direct Utilization of Geothermal Energy 2015 Worldwide Review. Proceedings World Geothermal Congress 2015. Melbourne-Australia.
  • M. Parlaktuna, O. Mertoglu, S. Simsek, H. Paksoy and N. Basarir, 2013. Geothermal Country Update Report of Turkey (2010-2013). European Geothermal Congress. Pisa- Italy.
  • A. Ragnarsson and I. Hrolfsson, 1998. Akranes and Borgarfjordur District Heating System. Geo-Heat Center Quarterly Bulletin, 19 (4).
  • M. H. Dickson, and M. Fanelli (Eds.), Geothermal Energy Utilization and Technology, UNESCO, France, 2003. G. P. Ryan, 1981. Equipment Used in Direct Heat Projects. Geothermal Resources Council Transactions.5, Davis, CA, pp. 483-485.
  • J.W. Lund, 2006. Direct Heat Utilization of Geothermal Resources Worldwide 2005. ASEG Extended Abstracts 2006: 18th Geophysical Conference.1-15.
  • T. Akyol, 2016. Energy and Exergy Analysis of Bigadiç-Balıkesir Geothermal District Heating System, PhD Thesis, Department of Mechanical Engineering, Graduate School of Natural and Applied Sciences, Balıkesir University, Turkey.
  • A.D. Karaoglan, N. Celik, 2016. A New Painting Process for Vessel Radiators of Transformer: Wet-on-Wet (WOW). Journal of Applied Statistics. 43 (2), 370-386.
Toplam 8 adet kaynakça vardır.

Ayrıntılar

Konular Çevre Mühendisliği
Bölüm Makaleler
Yazarlar

UĞUR Akyol

TUĞRUL Akyol

A. DENİZ Karaoğlan Bu kişi benim

BEDRİ Yüksel Bu kişi benim

ASİYE Aslan Bu kişi benim

Yayımlanma Tarihi 27 Aralık 2017
Yayımlandığı Sayı Yıl 2017 Cilt: 1 Sayı: 1

Kaynak Göster

APA Akyol, U., Akyol, T., Karaoğlan, A. D., Yüksel, B., vd. (2017). Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM). International Journal of Environmental Trends (IJENT), 1(1), 22-31.
AMA Akyol U, Akyol T, Karaoğlan AD, Yüksel B, Aslan A. Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM). IJENT. Aralık 2017;1(1):22-31.
Chicago Akyol, UĞUR, TUĞRUL Akyol, A. DENİZ Karaoğlan, BEDRİ Yüksel, ve ASİYE Aslan. “Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM)”. International Journal of Environmental Trends (IJENT) 1, sy. 1 (Aralık 2017): 22-31.
EndNote Akyol U, Akyol T, Karaoğlan AD, Yüksel B, Aslan A (01 Aralık 2017) Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM). International Journal of Environmental Trends (IJENT) 1 1 22–31.
IEEE U. Akyol, T. Akyol, A. D. Karaoğlan, B. Yüksel, ve A. Aslan, “Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM)”, IJENT, c. 1, sy. 1, ss. 22–31, 2017.
ISNAD Akyol, UĞUR vd. “Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM)”. International Journal of Environmental Trends (IJENT) 1/1 (Aralık 2017), 22-31.
JAMA Akyol U, Akyol T, Karaoğlan AD, Yüksel B, Aslan A. Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM). IJENT. 2017;1:22–31.
MLA Akyol, UĞUR vd. “Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM)”. International Journal of Environmental Trends (IJENT), c. 1, sy. 1, 2017, ss. 22-31.
Vancouver Akyol U, Akyol T, Karaoğlan AD, Yüksel B, Aslan A. Flow Rate Estimation Modelling in a Transmission Pipeline Using Response Surface Methodology (RSM). IJENT. 2017;1(1):22-31.

Environmental Engineering, Environmental Sustainability and Development, Industrial Waste Issues and Management, Global warming and Climate Change, Environmental Law, Environmental Developments and Legislation, Environmental Protection, Biotechnology and Environment, Fossil Fuels and Renewable Energy, Chemical Engineering, Civil Engineering, Geological Engineering, Mining Engineering, Agriculture Engineering, Biology, Chemistry, Physics,