Research Article
BibTex RIS Cite
Year 2021, Volume: 25 Issue: 3, 735 - 740, 30.06.2021
https://doi.org/10.16984/saufenbilder.797337

Abstract

Supporting Institution

GAZİOSMANPAŞA ÜNİVERSİTESİ BAP KOORDİNATÖRLÜĞÜ

Project Number

2017/95

References

  • [1] C. M. Wayman, K. Otsuka, “Shape Memory Materials,” Cambridge University Press, 1998.
  • [2] R. D. Noebe, T. Biles, S. A. Padula, “NiTibased high temperature shape-memory alloys: properties, prospects, and potential applications, in ‘Advanced structural materials: properties, design optimization, and applications,” (ed. W. O. Soboyejo and T. S. Srivatsan); New York, Taylor & Francis Group, 2007.
  • [3] Q. Li, J. Li, G. Ma, X. Liu, D. Pana, “Influence of ω phase precipitation on mechanical performance and corrosion resistance of Ti–Nb–Zr alloy,” Material and Design, 11C, pp. 421-428, 2016.
  • [4] J. Wang, Q. Li, C. Xiong, Y. Li, B. Sun, “Effect of Zr on the martensitic transformation and the shape memory effect in Ti-Zr-Nb-Ta high-temperature shape memory alloys,” Journal of Alloys and Compounds, 737, pp. 672-677, 2018.
  • [5] X. Yi, Y. Wang, B. Sun, B. Cui, J. Liu, X. Meng, Z. Gao, W. Cai, L. Zhao, “Crystallization process and microstructural evolution of as-spun Ti-Ni-Zr alloy ribbon,” Journal of Alloys and Compounds, 762, pp. 62-66, 2018.
  • [6] C. Xiong, L. Yaoa, B. Yuan, W. Qu,, Y. Li, “Strain induced martensite stabilization and shape memory effect of Ti-20Zr–10Nb–4Ta alloy,” Materials Science&Engineering A, 658, pp. 28–32, 2016.
  • [7] O. Uzun, T. Karaaslan, M. Keskin, “Production and structure of rapidly solidified Al–Si alloys,” Turk J. Phys., 25:455–66, 2001.
  • [8] O. Uzun, T. Karaaslan, M. Göğebakan, M. Keskin, “Hardness and microstructural characteristics of rapidly solidified Al–8–16 wt. % Si Alloys,” J. Alloys Compd., 376:149–57, 2004.
  • [9] Y. Kim, Y. Yun, T. Nam, “The effect of the melt spinning processing parameters on the solidification structures in Ti–30 at.% Ni–20 at.% Cu shape memory alloys,” Mater Sci Eng A., 438–440:545–8, 2006.
  • [10] H.Y. Kim, M. Mizutani, S. Miyazaki, “Crystallization process and shape memory properties of TieNieZr thin films,” Acta Mater., 57, 1920-1930, 2009.
  • [11] Y. Motemani, P. J. McCluskey, C. W. Zhao, M. J. Tan, “Analysis of Ti-Ni- Hf shape memory alloys by combinatorial nanocalorimetry,” Acta Mater. 59, 7602- 7614, 2011.
  • [12] Y. Y. Li, S. S. Cao, X. Ma, C. B. Ke, X. P. Zhang, “Influence of strongly textured microstructure on the all-round shape memory effect of rapidly solidified Ni51Ti49 alloy,” Materials Science & Engineering A., 705, 273–281, 2017.
  • [13] S. Ergen, O. Uzun, F. Yılmaz, F. Kiliçaslan, “Shape memory properties and microstructural evolution of rapidly solidified CuAlBe alloys,” Materials Characterization, 80, pp. 92-97, 2013.
  • [14] Ö. Bağ, F. Yılmaz, U. Kölemen, S. Ergen, C. Temiz and O. Uzun, “Transformational, microstructural and superelasticity characteristics of Ti–V–Al high temperature shape memory alloys with Zr addition,” Physica Scripta, Vol. 96, 8, 2021.

Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr

Year 2021, Volume: 25 Issue: 3, 735 - 740, 30.06.2021
https://doi.org/10.16984/saufenbilder.797337

Abstract

In this study, the effects of Zr addition on phase transformation temperatures, microstructure of Ti-12V-4Al (wt. %) high temperature shape memory alloys (HTSMAs) manufactured using melt-spinning technique were investigated. During heating, differential scanning calorimetry (DSC) curves showed that austenite transformation temperature of Ti-12V-4Al (wt. %) melt-spun ribbon was single-stage transformation and Ti-12V-4Al-0.5Zr (wt. %) melt-spun ribbon was two-stage transformation. In the scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyzes, unveiled that the melt-spun ribbons consisted of martensite, austenite and R phases. Transmission electron microscopy (TEM) analysis showed that the thickness of martensite plates in ribbons was thinned by the addition of Zr.

Project Number

2017/95

References

  • [1] C. M. Wayman, K. Otsuka, “Shape Memory Materials,” Cambridge University Press, 1998.
  • [2] R. D. Noebe, T. Biles, S. A. Padula, “NiTibased high temperature shape-memory alloys: properties, prospects, and potential applications, in ‘Advanced structural materials: properties, design optimization, and applications,” (ed. W. O. Soboyejo and T. S. Srivatsan); New York, Taylor & Francis Group, 2007.
  • [3] Q. Li, J. Li, G. Ma, X. Liu, D. Pana, “Influence of ω phase precipitation on mechanical performance and corrosion resistance of Ti–Nb–Zr alloy,” Material and Design, 11C, pp. 421-428, 2016.
  • [4] J. Wang, Q. Li, C. Xiong, Y. Li, B. Sun, “Effect of Zr on the martensitic transformation and the shape memory effect in Ti-Zr-Nb-Ta high-temperature shape memory alloys,” Journal of Alloys and Compounds, 737, pp. 672-677, 2018.
  • [5] X. Yi, Y. Wang, B. Sun, B. Cui, J. Liu, X. Meng, Z. Gao, W. Cai, L. Zhao, “Crystallization process and microstructural evolution of as-spun Ti-Ni-Zr alloy ribbon,” Journal of Alloys and Compounds, 762, pp. 62-66, 2018.
  • [6] C. Xiong, L. Yaoa, B. Yuan, W. Qu,, Y. Li, “Strain induced martensite stabilization and shape memory effect of Ti-20Zr–10Nb–4Ta alloy,” Materials Science&Engineering A, 658, pp. 28–32, 2016.
  • [7] O. Uzun, T. Karaaslan, M. Keskin, “Production and structure of rapidly solidified Al–Si alloys,” Turk J. Phys., 25:455–66, 2001.
  • [8] O. Uzun, T. Karaaslan, M. Göğebakan, M. Keskin, “Hardness and microstructural characteristics of rapidly solidified Al–8–16 wt. % Si Alloys,” J. Alloys Compd., 376:149–57, 2004.
  • [9] Y. Kim, Y. Yun, T. Nam, “The effect of the melt spinning processing parameters on the solidification structures in Ti–30 at.% Ni–20 at.% Cu shape memory alloys,” Mater Sci Eng A., 438–440:545–8, 2006.
  • [10] H.Y. Kim, M. Mizutani, S. Miyazaki, “Crystallization process and shape memory properties of TieNieZr thin films,” Acta Mater., 57, 1920-1930, 2009.
  • [11] Y. Motemani, P. J. McCluskey, C. W. Zhao, M. J. Tan, “Analysis of Ti-Ni- Hf shape memory alloys by combinatorial nanocalorimetry,” Acta Mater. 59, 7602- 7614, 2011.
  • [12] Y. Y. Li, S. S. Cao, X. Ma, C. B. Ke, X. P. Zhang, “Influence of strongly textured microstructure on the all-round shape memory effect of rapidly solidified Ni51Ti49 alloy,” Materials Science & Engineering A., 705, 273–281, 2017.
  • [13] S. Ergen, O. Uzun, F. Yılmaz, F. Kiliçaslan, “Shape memory properties and microstructural evolution of rapidly solidified CuAlBe alloys,” Materials Characterization, 80, pp. 92-97, 2013.
  • [14] Ö. Bağ, F. Yılmaz, U. Kölemen, S. Ergen, C. Temiz and O. Uzun, “Transformational, microstructural and superelasticity characteristics of Ti–V–Al high temperature shape memory alloys with Zr addition,” Physica Scripta, Vol. 96, 8, 2021.
There are 14 citations in total.

Details

Primary Language English
Subjects Material Production Technologies
Journal Section Research Articles
Authors

Öznur Bağ 0000-0002-9944-8221

Fikret Yılmaz 0000-0002-1835-4961

Uğur Kölemen 0000-0001-9858-8823

Semra Ergen 0000-0002-5515-0933

Project Number 2017/95
Publication Date June 30, 2021
Submission Date September 21, 2020
Acceptance Date April 23, 2021
Published in Issue Year 2021 Volume: 25 Issue: 3

Cite

APA Bağ, Ö., Yılmaz, F., Kölemen, U., Ergen, S. (2021). Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr. Sakarya University Journal of Science, 25(3), 735-740. https://doi.org/10.16984/saufenbilder.797337
AMA Bağ Ö, Yılmaz F, Kölemen U, Ergen S. Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr. SAUJS. June 2021;25(3):735-740. doi:10.16984/saufenbilder.797337
Chicago Bağ, Öznur, Fikret Yılmaz, Uğur Kölemen, and Semra Ergen. “Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys With Addition of Zr”. Sakarya University Journal of Science 25, no. 3 (June 2021): 735-40. https://doi.org/10.16984/saufenbilder.797337.
EndNote Bağ Ö, Yılmaz F, Kölemen U, Ergen S (June 1, 2021) Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr. Sakarya University Journal of Science 25 3 735–740.
IEEE Ö. Bağ, F. Yılmaz, U. Kölemen, and S. Ergen, “Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr”, SAUJS, vol. 25, no. 3, pp. 735–740, 2021, doi: 10.16984/saufenbilder.797337.
ISNAD Bağ, Öznur et al. “Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys With Addition of Zr”. Sakarya University Journal of Science 25/3 (June 2021), 735-740. https://doi.org/10.16984/saufenbilder.797337.
JAMA Bağ Ö, Yılmaz F, Kölemen U, Ergen S. Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr. SAUJS. 2021;25:735–740.
MLA Bağ, Öznur et al. “Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys With Addition of Zr”. Sakarya University Journal of Science, vol. 25, no. 3, 2021, pp. 735-40, doi:10.16984/saufenbilder.797337.
Vancouver Bağ Ö, Yılmaz F, Kölemen U, Ergen S. Microstructures and Phase Transformations of Melt-Spun Ti-V-Al High Temperature Shape Memory Alloys with Addition of Zr. SAUJS. 2021;25(3):735-40.

Sakarya University Journal of Science (SAUJS)