Research Article
BibTex RIS Cite

Electromagnetic Interference Shielding Effectiveness of Copper Foil Coated Oriented Strand Board

Year 2018, Volume: 9 Issue: Ek (Suppl.) 1, 279 - 284, 14.12.2018
https://doi.org/10.29048/makufebed.485961

Abstract

The influence of growth of electronics industry and
its widespread use in communications, automation, biomedical, space and other
fields leads to many electromagnetic interference problems. Electromagnetic
interference is the deterioration of operation of an electronic device when it
is in the close neighborhood of an electromagnetic field in the radio frequency
spectrum that is caused by another electronic device. This deterioration
affects electronic devices as well as human health. Therefore, there is a need
to effectively protect against the adverse effects of electromagnetic
interference. In this paper, copper board and oriented strand board were used
as a hybrid composite material. The interface and surface of oriented strand
board were coated with copper foil and the metal cage was formed. It was found
that electromagnetic shielding effectiveness in the frequency range of 1.88 GHz
- 2.62 GHz and 5.20 GHz - 5.62 GHz of the oriented copper foil coated oriented
particle board was acceptable.

References

  • Abdolzadeh, H., Doosthoseini, K., Karimi, A.N., Enayati, A.A. (2011). The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard. European Journal of Wood and Wood Products 69: 3-10.
  • Aydın, I., Çolakoğlu, G., Çolak, S., Demirkır, C. (2006). Effects of moisture content on formaldehyde emission and mechanical properties of plywood. Building and Environment, 41: 1311-1316.
  • Beall, C., Delzell, E., Cole, P., Brill, I. (1996). Brain tumors among electronics industry workers. Epidemiology, 7(2): 125-130.
  • Dunky, M., Pizzi A. (2002). Wood Adhesives, Adhesive Science and Engineering-2: Surfaces, Chemistry and Applications, Elsevier, Amsterdam.
  • Geetha, S., Satheesh Kumar, K.K., Chepuri R. K. Rao, Vijayan, M., Trivedi, D.C. (2009). EMI shielding: Methods and materials – a review. Journal of Applied Polymer Science 112: 2073-2086.
  • Kaya, A.İ. (2015). Atık kâğıtlardan geri kazanılmış liflerden kompozit malzeme üretim olanaklarının araştırılması, Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü, (Doktora tezi), Isparta.
  • Keangin, P., Vafai, K., Rattanadecho, P. (2013). Electromagnetic field effects on biological materials. International Journal of Heat and Mass Transfer 65: 389-399.
  • Loomis, D.P., Savitz, D.A. (1990). Mortality from brain cancer and leukaemia among electrical workers. British Journal of Industrial Medicine 47(9): 633-638.
  • Rebollar, M., Pérez, R., Vidal, R. (2007). Comparison between oriented strand boards and other wood-based panels for the manufacture of furniture. Materials and Design 28: 882-888.
  • Roumeli, E., Pavlidou, E., Papadopoulou, E., Vourlias, G., Bikiaris, D., Paraskevopoulos, K.M., Chrissafis, K. (2012). Synthesis, characterization and thermal analysis of urea formaldehyde/nano SiO2 resins. Thermochimica Acta 527: 33-39.
  • Salman, S. (2006). Hormones, breast cancer, EMF’s cellphones. Total Healty 28(1): 24-25.
  • Schulz, R.B., Plantz, V.C., Brush, D.R. (1988). Shielding theory and practice. IEEE Transactions on Electromagnetic Compatibility 30(3): 187-201.
  • Singh, A.K., Shishkin, A., Koppel, T., Gupta, N. (2018). A review of porous lightweight composite materials for electromagnetic interference shielding. Composites Part B: Engineering 149: 188-197.
  • Thomas, D.W.P., Denton, A., Konefal, T., Benson, T.M., Christopoulos, C., Dawson, J.F., Marvin, A.C., Porter, J. (1999). Characterization of the shielding effectiveness of loaded equipment enclosures. International Conference and Exhibition on Electromagnetic Compatibility, July 12-13, 1999, York, UK, 89-94p.
  • TS EN 300 (1997). Yönlendirilmiş Yonga Levhaları Tarifler, Sınıflandırma ve Özellikler, TSE, Ankara.
  • Violette, J.L.N., White, D.R.J., Violette, M.F. (1987). Electromagnetic Compatibility Handbook. Van Nostrand Reinhold Company, New York.
  • Zamanian, A., Hardiman, C. (2005). Electromagnetic radiation and human health: A review of sources and effects. High Frequency Electronics 4(3): 16-26.

Bakır Folyo Kaplı Yönlendirilmiş Yonga Levhanın Elektromanyetik Girişimi Soğurma Etkinliği

Year 2018, Volume: 9 Issue: Ek (Suppl.) 1, 279 - 284, 14.12.2018
https://doi.org/10.29048/makufebed.485961

Abstract

Elektronik
endüstrisinin büyümesinin ve haberleşme, otomasyon, biyomedikal, uzay ve diğer
alanlardaki yaygın kullanımının etkisi birçok elektromanyetik girişim sorununa
yol açmaktadır. Elektromanyetik girişim bir elektronik cihazın, başka bir
elektronik cihazdan kaynaklanan, radyo frekansı spektrumunda bir
elektromanyetik alanın yakınında çalışmasıyla ortaya çıkan bozulmadır. Bu
bozulma elektronik cihazları etkilediği gibi insan sağlığını da etkilemektedir.
Bu nedenle, elektromanyetik girişimin olumsuz etkilerinden etkili bir şekilde korunma
ihtiyacı ortaya çıkmaktadır.
Bu makalede, yönlendirilmiş yonga levha ile bakır levha karma kompozit
malzeme olarak kullanılmıştır. Yönlendirilmiş yonga levhanın ara yüzeyi ile
yüzeyi bakır folyo ile kaplanarak metal kafes oluşturulmuştur. Bakır folyo
kaplı yönlendirilmiş yonga levhanın
1.88 GHz ile 2.62 GHz ve 5.20 GHz ile 5.62 GHz frekansları
arasında elektromanyetik soğurma etkinliğinin kabul edilebilir düzeyde olduğu
görülmüştür.     

References

  • Abdolzadeh, H., Doosthoseini, K., Karimi, A.N., Enayati, A.A. (2011). The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard. European Journal of Wood and Wood Products 69: 3-10.
  • Aydın, I., Çolakoğlu, G., Çolak, S., Demirkır, C. (2006). Effects of moisture content on formaldehyde emission and mechanical properties of plywood. Building and Environment, 41: 1311-1316.
  • Beall, C., Delzell, E., Cole, P., Brill, I. (1996). Brain tumors among electronics industry workers. Epidemiology, 7(2): 125-130.
  • Dunky, M., Pizzi A. (2002). Wood Adhesives, Adhesive Science and Engineering-2: Surfaces, Chemistry and Applications, Elsevier, Amsterdam.
  • Geetha, S., Satheesh Kumar, K.K., Chepuri R. K. Rao, Vijayan, M., Trivedi, D.C. (2009). EMI shielding: Methods and materials – a review. Journal of Applied Polymer Science 112: 2073-2086.
  • Kaya, A.İ. (2015). Atık kâğıtlardan geri kazanılmış liflerden kompozit malzeme üretim olanaklarının araştırılması, Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü, (Doktora tezi), Isparta.
  • Keangin, P., Vafai, K., Rattanadecho, P. (2013). Electromagnetic field effects on biological materials. International Journal of Heat and Mass Transfer 65: 389-399.
  • Loomis, D.P., Savitz, D.A. (1990). Mortality from brain cancer and leukaemia among electrical workers. British Journal of Industrial Medicine 47(9): 633-638.
  • Rebollar, M., Pérez, R., Vidal, R. (2007). Comparison between oriented strand boards and other wood-based panels for the manufacture of furniture. Materials and Design 28: 882-888.
  • Roumeli, E., Pavlidou, E., Papadopoulou, E., Vourlias, G., Bikiaris, D., Paraskevopoulos, K.M., Chrissafis, K. (2012). Synthesis, characterization and thermal analysis of urea formaldehyde/nano SiO2 resins. Thermochimica Acta 527: 33-39.
  • Salman, S. (2006). Hormones, breast cancer, EMF’s cellphones. Total Healty 28(1): 24-25.
  • Schulz, R.B., Plantz, V.C., Brush, D.R. (1988). Shielding theory and practice. IEEE Transactions on Electromagnetic Compatibility 30(3): 187-201.
  • Singh, A.K., Shishkin, A., Koppel, T., Gupta, N. (2018). A review of porous lightweight composite materials for electromagnetic interference shielding. Composites Part B: Engineering 149: 188-197.
  • Thomas, D.W.P., Denton, A., Konefal, T., Benson, T.M., Christopoulos, C., Dawson, J.F., Marvin, A.C., Porter, J. (1999). Characterization of the shielding effectiveness of loaded equipment enclosures. International Conference and Exhibition on Electromagnetic Compatibility, July 12-13, 1999, York, UK, 89-94p.
  • TS EN 300 (1997). Yönlendirilmiş Yonga Levhaları Tarifler, Sınıflandırma ve Özellikler, TSE, Ankara.
  • Violette, J.L.N., White, D.R.J., Violette, M.F. (1987). Electromagnetic Compatibility Handbook. Van Nostrand Reinhold Company, New York.
  • Zamanian, A., Hardiman, C. (2005). Electromagnetic radiation and human health: A review of sources and effects. High Frequency Electronics 4(3): 16-26.
There are 17 citations in total.

Details

Primary Language Turkish
Subjects Engineering
Journal Section Research Paper
Authors

Ali İhsan Kaya 0000-0002-1860-9610

Ahmet Çifci 0000-0001-7679-9945

Publication Date December 14, 2018
Acceptance Date December 11, 2018
Published in Issue Year 2018 Volume: 9 Issue: Ek (Suppl.) 1

Cite

APA Kaya, A. İ., & Çifci, A. (2018). Bakır Folyo Kaplı Yönlendirilmiş Yonga Levhanın Elektromanyetik Girişimi Soğurma Etkinliği. Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 9(Ek (Suppl.) 1), 279-284. https://doi.org/10.29048/makufebed.485961