Research Article
BibTex RIS Cite

Year 2019, Volume: 3 Issue: 1, 1 - 8, 26.08.2019

Halit Sübütay Mehmet Şimşir

Abstract

References

  • [1] Eyuboglu AS, Ozcelik Y, Kulaksiz S, Engin IC. Statistical and microscopic investigation of disc segment wear related to sawing Ankara andesites. J. of Rock Mech. & Mining Sci., 2003, 40, 405–414.
  • [2] German RM, Powder Metallurgy Science, 2nd ed., Princeton, New Jersey: Metal Powder Industries Federation; 1994.
  • [3] Dos Santos SI, Balzaretti NM, Da Jornada JAH. Adhesion between CVD diamond and WC-Co induced by high-pressure and high-temperature. Dia. & Related Mater. 2006; 15:1457 – 1461.
  • [4] Zhang, Y. Zhang, H.L. Wu, J.H. Enhanced thermal conductivity in copper matrix composites reinforced with titanium-coated diamond particles, Scripta Materialia, 2011, 65, 1097-1100.
  • [5] Ünal, R., Effect of Cobalt to Bronze ratio on Transvers Rupture Strength of Diamond Segments, Materials Science Forum, 2007, 534-536, 1105-1108,
  • [6] Konstanty, J., Tyrala, D. Wear mechanism of iron-base diamond- impregnated tool composites, Wear, 2013, 303, 533–540.
  • [7] Ersoy. A,, Buyuksagic. S.,.Wear characteristics of circular diamond saws in the cutting of different hard abrasive rocks, Wear, 2005, 258, 1422–1436. [8] Şimsir M. and Öksüz, K. E., Effects of Sintering Temperature and Addition of Fe and B4C on Hardness and Wear Resistance of Diamond Reinforced Metal Matrix Composites, Journal of Superhard Materials, 2013,35, (6), 369–382.
  • [9] Islak, S., Çelik, H., Effect of Sintering Temperature and Boron Carbide Content on the Wear Behavior of Hot Pressed Diamond Cutting Segments. Science Of Sintering, 2015, 47(2),131-143,.
  • [10] Ucun I, Aslantas K, Büyüksagis İS, Tasgetiren S. An investigation on the effect of diamond concentration and matrix material composition in the circular sawing process of granites Proc. Inst. of Mech. Eng., Part C: J. Mech. Eng. Sci., 2010;1:1-11.
  • [11] Boland JN, Li XS. Microstructural Characterization and Wear Behavior of Diamond Composite Materials. Materials, 2010; 3:1390-1419.
  • [12] Ucun I, Aslantas K, Tasgetiren S, Buyuksagıs IS. Fracture path prediction of diamond segment in a marble cutting disc. Fatigue & Frac. of Eng. Mater. & Struct., 2008;31:517–525
  • [13]Oliveira LJ, Bobrovnitchii GS, Filgueira M. Processing and characterization of impregnated diamond cutting tools using a ferrous metal matrix. Int. J. Refract. Met. Hard Mater. 2006;25(4):328–335.
  • [14] Huadong D, Yawen L, Hongqi H, Zhihao J. Decreasing the sintering temperature of diamond-bit matrix material by the addition of the element. J. Mater. Process. Technol., 1998;74:52–55.
  • [15] Hsieh YZ, Chen JF, Lin ST. Pressureless sintering of metal-bonded diamond particle composite blocks. J. Mater. Sci. 2000;35:5383 – 5387.
  • [16] Hsieh YZ, Lin ST. Diamond tool bits with iron alloys as the binding matrices. Mater. Chem. and Phys. 2001;72:121–125.
  • [17] Karagöz S, Zeren M. The Property optimization of diamond-cutting tools with the help of microstructural characterization. Int. J. Refract. Met. Hard Mater. 2001;19:23–26.
  • [18] Dai QL, Luo CB, Xu XP, Wang YC. Effects of rare earth and sintering temperature on the transverse rupture strength of Fe-based diamond composites. J. Mater. Process. Technol. 2002;129:427-430.
  • [19]Thorat RR, Brahmankar PK, Mohan TRR. Consolidation Behavior of Cu-Co-Fe Pre-Alloyed Powders. International Symposium of Research Students on Materials Science and Engineering, 20-22 December, 2004, Chennai, India p.1-6.
  • [20] Chang R, Znag J, Wang Y, Lu J. Study of Ti-coated diamond grits prepared by spark plasma coating. Diamond and Related Materials, 2017; 77:72-78,
  • [21] Unal R, Gurcay EA. Matrix composition effect on the wear behavior of diamond segments. Mater. Sci. Forum 2007;534–536:1113–1116.
  • [22] Barbosa AP, Bobrovnitchii GS, Skury ALD, Guimarães RS, Filgueira M. Structure, microstructure and mechanical properties of PM Fe–Cu–Co alloys. Mater. & Des. 2010, 31:522–526.
  • [23] Spriano S, Chen Q, Settineri L, Bugliosi S. Low content and free cobalt matrixes for diamond tools. Wear 2005;259:1190–1196.
  • [24] Karagöz S, Zeren M. Sintering of polycrystalline diamond cutting tools. Mater. & Des. 2007;28:1055–1058.
  • [25] Kaplan M., Budak, S. Bir Mermer Kesici Takımında Co Katkısının Mikroyapı ve Mekanik Özelliklere Etkisi, 6th International Advanced Technologies Symposium (IATS’11), 2011, 183-188.
  • [26] Konstanty J. The materials science of stone sawing. Ind. Dia. Rev. 1991;1:27-31.
  • [27] Selvi, E. Doğal taş kesmede kullanılan elmas takımların serbest sinterlenmesi ve karakterizasyonu. İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, (Yüksek Lisans Tezi),2013, 73 s, İstanbul.
  • [28] Çelik. E. Elmaslı kesici takımlarda alternatif bağlayıcılar. Fırat Üniversitesi Fen Bilimleri Enstitüsü. (Doktora Tezi),2009, 93 s, Elazığ.
  • [29] Hünder, E. Demir esaslı alaşımların bağlayıcı matris olarak kullanıldığı elmas kesici uçların karakterizasyonu, İTÜ Fen Bilimleri Enstitüsü, 2012, 81 s, İstanbul

Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process

Year 2019, Volume: 3 Issue: 1, 1 - 8, 26.08.2019

Halit Sübütay Mehmet Şimşir

Abstract

Using
of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in
Natural Stone Sawing Process

 

Halit Sübütay 1, Mehmet Şİmşir 2, 


Original scientific

Performance of segment in the natural stone sawing process is decreased due to various reasons such as; non-uniform distribution of diamond grits, contact of diamond grits to each other’s, segregation of uncoated diamond grits in metal matrix, wrongly selected type of metal powders and diamond grit size. The aim of this experimental work is to prevent the clustering of diamond grits in segment production and to improve the sawing performance of segment in terms of microstructure, density, hardness and wear properties by using metal coated diamond grits. Three types of diamond segments (A: Commercial segment, B: Diamond with coated segment, E: segment without diamond) were produced in different compositions by powder metallurgy (P/M) and each one of the segment sample was sintered at three different temperatures (800, 900, 1000 °C) holding fifteen minutes under vacuum by hot pressing method. 
The highest hardness and wear resistance have been determined in B type sample sintered 900 oC. The phases formed in the microstructures were analyzed using SEM, EDS techniques and mapping.  Fractured surfaces and wear surface were examined by scanning electron microscopy and the fracture, wear mechanisms were evaluated.

 













Keywords: Mechanical Properties, Metal Coated Diamond; Microstructure,  Powder Metallurgy,  Segment,  Wear

Keywords

Powder Metallurgy; Segment; Metal Coated Diamond; Microstructure; Mechanical Properties

References

  • [1] Eyuboglu AS, Ozcelik Y, Kulaksiz S, Engin IC. Statistical and microscopic investigation of disc segment wear related to sawing Ankara andesites. J. of Rock Mech. & Mining Sci., 2003, 40, 405–414.
  • [2] German RM, Powder Metallurgy Science, 2nd ed., Princeton, New Jersey: Metal Powder Industries Federation; 1994.
  • [3] Dos Santos SI, Balzaretti NM, Da Jornada JAH. Adhesion between CVD diamond and WC-Co induced by high-pressure and high-temperature. Dia. & Related Mater. 2006; 15:1457 – 1461.
  • [4] Zhang, Y. Zhang, H.L. Wu, J.H. Enhanced thermal conductivity in copper matrix composites reinforced with titanium-coated diamond particles, Scripta Materialia, 2011, 65, 1097-1100.
  • [5] Ünal, R., Effect of Cobalt to Bronze ratio on Transvers Rupture Strength of Diamond Segments, Materials Science Forum, 2007, 534-536, 1105-1108,
  • [6] Konstanty, J., Tyrala, D. Wear mechanism of iron-base diamond- impregnated tool composites, Wear, 2013, 303, 533–540.
  • [7] Ersoy. A,, Buyuksagic. S.,.Wear characteristics of circular diamond saws in the cutting of different hard abrasive rocks, Wear, 2005, 258, 1422–1436. [8] Şimsir M. and Öksüz, K. E., Effects of Sintering Temperature and Addition of Fe and B4C on Hardness and Wear Resistance of Diamond Reinforced Metal Matrix Composites, Journal of Superhard Materials, 2013,35, (6), 369–382.
  • [9] Islak, S., Çelik, H., Effect of Sintering Temperature and Boron Carbide Content on the Wear Behavior of Hot Pressed Diamond Cutting Segments. Science Of Sintering, 2015, 47(2),131-143,.
  • [10] Ucun I, Aslantas K, Büyüksagis İS, Tasgetiren S. An investigation on the effect of diamond concentration and matrix material composition in the circular sawing process of granites Proc. Inst. of Mech. Eng., Part C: J. Mech. Eng. Sci., 2010;1:1-11.
  • [11] Boland JN, Li XS. Microstructural Characterization and Wear Behavior of Diamond Composite Materials. Materials, 2010; 3:1390-1419.
  • [12] Ucun I, Aslantas K, Tasgetiren S, Buyuksagıs IS. Fracture path prediction of diamond segment in a marble cutting disc. Fatigue & Frac. of Eng. Mater. & Struct., 2008;31:517–525
  • [13]Oliveira LJ, Bobrovnitchii GS, Filgueira M. Processing and characterization of impregnated diamond cutting tools using a ferrous metal matrix. Int. J. Refract. Met. Hard Mater. 2006;25(4):328–335.
  • [14] Huadong D, Yawen L, Hongqi H, Zhihao J. Decreasing the sintering temperature of diamond-bit matrix material by the addition of the element. J. Mater. Process. Technol., 1998;74:52–55.
  • [15] Hsieh YZ, Chen JF, Lin ST. Pressureless sintering of metal-bonded diamond particle composite blocks. J. Mater. Sci. 2000;35:5383 – 5387.
  • [16] Hsieh YZ, Lin ST. Diamond tool bits with iron alloys as the binding matrices. Mater. Chem. and Phys. 2001;72:121–125.
  • [17] Karagöz S, Zeren M. The Property optimization of diamond-cutting tools with the help of microstructural characterization. Int. J. Refract. Met. Hard Mater. 2001;19:23–26.
  • [18] Dai QL, Luo CB, Xu XP, Wang YC. Effects of rare earth and sintering temperature on the transverse rupture strength of Fe-based diamond composites. J. Mater. Process. Technol. 2002;129:427-430.
  • [19]Thorat RR, Brahmankar PK, Mohan TRR. Consolidation Behavior of Cu-Co-Fe Pre-Alloyed Powders. International Symposium of Research Students on Materials Science and Engineering, 20-22 December, 2004, Chennai, India p.1-6.
  • [20] Chang R, Znag J, Wang Y, Lu J. Study of Ti-coated diamond grits prepared by spark plasma coating. Diamond and Related Materials, 2017; 77:72-78,
  • [21] Unal R, Gurcay EA. Matrix composition effect on the wear behavior of diamond segments. Mater. Sci. Forum 2007;534–536:1113–1116.
  • [22] Barbosa AP, Bobrovnitchii GS, Skury ALD, Guimarães RS, Filgueira M. Structure, microstructure and mechanical properties of PM Fe–Cu–Co alloys. Mater. & Des. 2010, 31:522–526.
  • [23] Spriano S, Chen Q, Settineri L, Bugliosi S. Low content and free cobalt matrixes for diamond tools. Wear 2005;259:1190–1196.
  • [24] Karagöz S, Zeren M. Sintering of polycrystalline diamond cutting tools. Mater. & Des. 2007;28:1055–1058.
  • [25] Kaplan M., Budak, S. Bir Mermer Kesici Takımında Co Katkısının Mikroyapı ve Mekanik Özelliklere Etkisi, 6th International Advanced Technologies Symposium (IATS’11), 2011, 183-188.
  • [26] Konstanty J. The materials science of stone sawing. Ind. Dia. Rev. 1991;1:27-31.
  • [27] Selvi, E. Doğal taş kesmede kullanılan elmas takımların serbest sinterlenmesi ve karakterizasyonu. İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, (Yüksek Lisans Tezi),2013, 73 s, İstanbul.
  • [28] Çelik. E. Elmaslı kesici takımlarda alternatif bağlayıcılar. Fırat Üniversitesi Fen Bilimleri Enstitüsü. (Doktora Tezi),2009, 93 s, Elazığ.
  • [29] Hünder, E. Demir esaslı alaşımların bağlayıcı matris olarak kullanıldığı elmas kesici uçların karakterizasyonu, İTÜ Fen Bilimleri Enstitüsü, 2012, 81 s, İstanbul
There are 28 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Articles
Authors

Halit Sübütay 0000-0002-1027-3016

Mehmet Şimşir This is me 0000-0002-8895-7821

Publication Date August 26, 2019
Submission Date March 13, 2019
Published in Issue Year 2019 Volume: 3 Issue: 1

Cite

APA Sübütay, H., & Şimşir, M. (2019). Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process. International Journal of Innovative Engineering Applications, 3(1), 1-8.
AMA Sübütay H, Şimşir M. Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process. IJIEA. August 2019;3(1):1-8.
Chicago Sübütay, Halit, and Mehmet Şimşir. “Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process”. International Journal of Innovative Engineering Applications 3, no. 1 (August 2019): 1-8.
EndNote Sübütay H, Şimşir M (August 1, 2019) Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process. International Journal of Innovative Engineering Applications 3 1 1–8.
IEEE H. Sübütay and M. Şimşir, “Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process”, IJIEA, vol. 3, no. 1, pp. 1–8, 2019.
ISNAD Sübütay, Halit - Şimşir, Mehmet. “Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process”. International Journal of Innovative Engineering Applications 3/1 (August 2019), 1-8.
JAMA Sübütay H, Şimşir M. Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process. IJIEA. 2019;3:1–8.
MLA Sübütay, Halit and Mehmet Şimşir. “Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process”. International Journal of Innovative Engineering Applications, vol. 3, no. 1, 2019, pp. 1-8.
Vancouver Sübütay H, Şimşir M. Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process. IJIEA. 2019;3(1):1-8.
 Download Cover Image