Research Article
BibTex RIS Cite

MEKANİK ALAŞIMLAMA İLE FeCrC TAKVİYELİ BAKIR ALAŞIMLARININ ÜRETİMİ VE ÖZELLİKLERİ

Year 2023, Volume: 10 Issue: 20, 135 - 140, 31.08.2023
https://doi.org/10.54365/adyumbd.1302673

Abstract

In this study, properties and fabrication of FeCrC reinforced copper alloys by mechanical alloying were examined using mechanical grinding, optical microscopy, energy dispersive spectroscope, X-ray diffraction, and hardness testing. MA had a very good ability to mix Cu-FeCrC particles. High FeCrC provided more cold work during milling. Thus, smaller crystallite size and greater internal stress occurred in Cu alloys. High performance Cu was further strengthened by a combination of fine grain and alloying. C23C6, Cr7C3 and α–Cu detected in the structure. The hardness of Cu increased significantly after grinding with FeCrC.

References

  • Zhang DL. Processing of advanced materials using high-energy mechanical milling. Progress in Materials Science 2004; 49: 537–560.
  • Lahiri I, Bhargava S. Compaction and sintering response of mechanically alloyed Cu–Cr powder. Powder Technology 2009; 189: 433–438.
  • Liu Q, Zhang X, Ge Y, Wang J, Cui JZ. Effect of processing and heat treatment on behavior of Cu-Cr-Zr alloys to railway contact wire. Metallurgical and Materials Transaction A 2006; 37: 3233–3238.
  • Batra IS, Dey GK, Kulkarni UD, Banerjee S. Microstructure and properties of a C-Cr-Zr alloy. Journal of Nuclear Materials 2001; 299: 91–100.
  • Zhou HT, Zhong JW, Zhou X, Zhao ZK, Li OB. Microstructure and properties of Cu-1.0Cr0.2Zr-0.03Fe alloy. Materials Science and Engineering A 2008; 498: 225–230.
  • Fang Q, Kang Z, Gan Y, Long Y. Microstructures and mechanical properties of spark plasma sintered Cu-Cr composites prepared by mechanical milling and alloying. Materials and Design 2015; 88: 8–15.
  • Shkodich NF, Rogachev AS, Vadchenko SG, Moskovskikh DO, Sachkova NV, Rouvimov S, Mukasyan AS. Bulk Cu-Cr nanocomposites by high-energy ball milling and spark plasma sintering. Journal of Alloys and Compounds 2014; 617: 39–46.
  • Fang Q, Kang ZX. An investigation on morphology and structure of Cu-Cr alloy powders prepared by mechanical milling and alloying. Powder Technology 2015; 270: 104–111.
  • Hu LX, Wang ED. Fabrication of high strength conductivity submicron crystalline Cu-5% Cr alloy by mechanical alloying. Transactions Nonferrous Metals Society of China 2000; 10: 209–212.
  • Zhou J, Zhu D, Tang L, Jiang X, Chen S, Peng X, Hu C. Microstructure and properties of powder metallurgy Cu-1%Cr-0.65%Zr alloy prepared by hot pressing. Vacuum 2016; 131: 156–163.
  • Wang Y, Tang BH, Li FY. The properties of self-formed diffusion barrier layer in Cu(Cr) alloy. Vacuum 2016; 126: 51–54.
  • Zhang C, Wang Y, Yang Z, Guo Y, Ding BJ. Microstructure and properties of vacuum induction melted CuCr25 alloys. Journal of Alloys and Compounds 2004; 366: 289–292.
  • Shen DP, Zhu YJ, Yang X, Tong WP. Investigation on the microstructure and properties of Cu-Cr alloy prepared by in-situ synthesis method. Vacuum 2018; 149: 207–213.
  • Sauvage X, Jessner P,Vurpillot F, Pippan R. Nanostructure and properties of a Cu–Cr composite processed by severe plastic deformation. Scripta Materialia 58; 12: 1125–1128.
  • Zhou ZM, Wang YP, Gao J, Kolbe M. Microstructure of rapidly solidified Cu 25wt.% Cr alloys. Materials Science and Engineering A 2005; 398: 318–322.
  • Seo D, Ogawa K, Sakaguchi K. Parameter study influencing thermal conductivity of annealed pure copper coatings deposited by selective cold spray processes. Surface Coating and Technology 2012; 206: 2316–2324.
  • Wu XK, Zhou XL, Cui H, Zheng X, Zhang JS. Deposition behavior and characteristics of cold-sprayed Cu-Cr composite deposits. Journal of Thermal Spray Technology 2012; 21: 792–799.
  • Zhang DL, Mihara K, Tsubokawa S, Suzuki HG. Precipitation characteristics of Cu-15Cr-0.15Zr in situ composite. Materials Science and Technology 2000; 16: 357–363.

FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING

Year 2023, Volume: 10 Issue: 20, 135 - 140, 31.08.2023
https://doi.org/10.54365/adyumbd.1302673

Abstract

In this study, properties and fabrication of FeCrC reinforced copper alloys by mechanical alloying were examined using mechanical grinding, optical microscopy, energy dispersive spectroscope, X-ray diffraction, and hardness testing. MA had a very good ability to mix Cu-FeCrC particles. High FeCrC provided more cold work during milling. Thus, smaller crystallite size and greater internal stress occurred in Cu alloys. High performance Cu was further strengthened by a combination of fine grain and alloying. C23C6, Cr7C3 and α–Cu detected in the structure. The hardness of Cu increased significantly after grinding with FeCrC.

References

  • Zhang DL. Processing of advanced materials using high-energy mechanical milling. Progress in Materials Science 2004; 49: 537–560.
  • Lahiri I, Bhargava S. Compaction and sintering response of mechanically alloyed Cu–Cr powder. Powder Technology 2009; 189: 433–438.
  • Liu Q, Zhang X, Ge Y, Wang J, Cui JZ. Effect of processing and heat treatment on behavior of Cu-Cr-Zr alloys to railway contact wire. Metallurgical and Materials Transaction A 2006; 37: 3233–3238.
  • Batra IS, Dey GK, Kulkarni UD, Banerjee S. Microstructure and properties of a C-Cr-Zr alloy. Journal of Nuclear Materials 2001; 299: 91–100.
  • Zhou HT, Zhong JW, Zhou X, Zhao ZK, Li OB. Microstructure and properties of Cu-1.0Cr0.2Zr-0.03Fe alloy. Materials Science and Engineering A 2008; 498: 225–230.
  • Fang Q, Kang Z, Gan Y, Long Y. Microstructures and mechanical properties of spark plasma sintered Cu-Cr composites prepared by mechanical milling and alloying. Materials and Design 2015; 88: 8–15.
  • Shkodich NF, Rogachev AS, Vadchenko SG, Moskovskikh DO, Sachkova NV, Rouvimov S, Mukasyan AS. Bulk Cu-Cr nanocomposites by high-energy ball milling and spark plasma sintering. Journal of Alloys and Compounds 2014; 617: 39–46.
  • Fang Q, Kang ZX. An investigation on morphology and structure of Cu-Cr alloy powders prepared by mechanical milling and alloying. Powder Technology 2015; 270: 104–111.
  • Hu LX, Wang ED. Fabrication of high strength conductivity submicron crystalline Cu-5% Cr alloy by mechanical alloying. Transactions Nonferrous Metals Society of China 2000; 10: 209–212.
  • Zhou J, Zhu D, Tang L, Jiang X, Chen S, Peng X, Hu C. Microstructure and properties of powder metallurgy Cu-1%Cr-0.65%Zr alloy prepared by hot pressing. Vacuum 2016; 131: 156–163.
  • Wang Y, Tang BH, Li FY. The properties of self-formed diffusion barrier layer in Cu(Cr) alloy. Vacuum 2016; 126: 51–54.
  • Zhang C, Wang Y, Yang Z, Guo Y, Ding BJ. Microstructure and properties of vacuum induction melted CuCr25 alloys. Journal of Alloys and Compounds 2004; 366: 289–292.
  • Shen DP, Zhu YJ, Yang X, Tong WP. Investigation on the microstructure and properties of Cu-Cr alloy prepared by in-situ synthesis method. Vacuum 2018; 149: 207–213.
  • Sauvage X, Jessner P,Vurpillot F, Pippan R. Nanostructure and properties of a Cu–Cr composite processed by severe plastic deformation. Scripta Materialia 58; 12: 1125–1128.
  • Zhou ZM, Wang YP, Gao J, Kolbe M. Microstructure of rapidly solidified Cu 25wt.% Cr alloys. Materials Science and Engineering A 2005; 398: 318–322.
  • Seo D, Ogawa K, Sakaguchi K. Parameter study influencing thermal conductivity of annealed pure copper coatings deposited by selective cold spray processes. Surface Coating and Technology 2012; 206: 2316–2324.
  • Wu XK, Zhou XL, Cui H, Zheng X, Zhang JS. Deposition behavior and characteristics of cold-sprayed Cu-Cr composite deposits. Journal of Thermal Spray Technology 2012; 21: 792–799.
  • Zhang DL, Mihara K, Tsubokawa S, Suzuki HG. Precipitation characteristics of Cu-15Cr-0.15Zr in situ composite. Materials Science and Technology 2000; 16: 357–363.
There are 18 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Makaleler
Authors

Tanju Teker 0000-0001-7293-0723

Serdar Osman Yılmaz 0000-0001-7593-6135

Publication Date August 31, 2023
Submission Date May 25, 2023
Published in Issue Year 2023 Volume: 10 Issue: 20

Cite

APA Teker, T., & Yılmaz, S. O. (2023). FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, 10(20), 135-140. https://doi.org/10.54365/adyumbd.1302673
AMA Teker T, Yılmaz SO. FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. August 2023;10(20):135-140. doi:10.54365/adyumbd.1302673
Chicago Teker, Tanju, and Serdar Osman Yılmaz. “FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING”. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 10, no. 20 (August 2023): 135-40. https://doi.org/10.54365/adyumbd.1302673.
EndNote Teker T, Yılmaz SO (August 1, 2023) FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 10 20 135–140.
IEEE T. Teker and S. O. Yılmaz, “FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING”, Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, vol. 10, no. 20, pp. 135–140, 2023, doi: 10.54365/adyumbd.1302673.
ISNAD Teker, Tanju - Yılmaz, Serdar Osman. “FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING”. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi 10/20 (August 2023), 135-140. https://doi.org/10.54365/adyumbd.1302673.
JAMA Teker T, Yılmaz SO. FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. 2023;10:135–140.
MLA Teker, Tanju and Serdar Osman Yılmaz. “FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING”. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, vol. 10, no. 20, 2023, pp. 135-40, doi:10.54365/adyumbd.1302673.
Vancouver Teker T, Yılmaz SO. FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi. 2023;10(20):135-40.